Wet laboratory
Freeness testers SR-CSF
Determine the raid of drainage of a diluted pulp suspension.
Disintegrator
Performs standard disintegration of the pulp suspension.
Pulper
Complete range of laboratory pulpers for all kinds of fibres.
Homogeniser
Maintains pulp suspensions in constant movement by means of
rotation
which prevents sedimentation.
PFI beater
Beats pulp prior to further evaluation.
Jokro beater
Beats pulp following Jokro through centrifugal force.
Valley laboratory beater
Used for pilot studies of pulping and blending under standard
conditions.
Bauer disc refiner
For pilot refining of chemical and semichemical pulps, chips
and recycled paper.
Rapid-Köthen sheet former
Produces hand sheets (diameter 200 mm) for the measurement of
the physical and optical properties of pulp.
Rectangle sheet former
Produces rectangular hand sheets in a standardised way for the
measurement of physical properties of pulp sheets.
Drum dryer
Dries laboratory hand sheets with a size up to 300 x 300 mm.
Speed dryer
Dries rapidly hand sheets from most sheet molds.
Flat dryer
Determines the moisture content of paper samples.
MasterscreenTM pulp fractionator
Separates mechanically fibres from contaminants, including stickes
and shives.
MasterscreenTM XLQ
Separates mechanically fibres from contaminants, including stickes
and shives.
Brecht Holl fiber classifier
Simple fractionator for detection of chips and fibre beams.
Flotation de-inking cell
For de-inking of recycled papers.
Digester
Provides realistic chip-cooking capabilities in a laboratory
environment.
Z-Span 1000
Entry level model for measuring effective fibre strength and
changes in fibre length, alignment and bonding.
Z-Span 2000 and 3000
Complete automated system for measuring effective fibre strength
and changes in fibre length, alignment and bondi
Dry laboratory
JDC cutter
Cuts test strips to an exact width and parallel throughout the
entire length.
Precision sample cutter
Used for easy, accurate and rapid sample preparation used in
RCT, CMT, Elmendorf, tensile and other methods.
Pneumatic sample cutter - type Billerud
Prepares accurate samples of corrugated board for ECT testing.
Vertical universal testers
(EJA Vantage, QC-3A, FPG 7/18, FPG 7/20, Z-directional, Vantage
HZT)
Instruments for tensile, compression and bending testing following
international standards.
Horizontal tensile tester
Determines the tensile strength of paper and tissue.
Crush tester
Determines the compression properties of corrugated board, components
and small packages.
ProgageTM electronic thickness tester
Measures quickly & accurately the thickness of sheet materials
such as paper.
Bending stiffness tester Gurley
Measures the bending resistance/stiffness.
ProtearTM elmendorf tearing tester +
heavy-duty
Fastest, most accurate and easiest way to determine the tearing
resistance of sheet materials.
Mullen Burst Tester
Measures the bursting strength of most flexible substrates including
paper and board.
Compression strength tester - method
STFI
Determines the compression strength of fluting medium or liner.
Internal bond tester
Supplies a repeatable method of checking for substrate failures
that only occur at high speeds.
Burst Tester for tissue
For testing resistance to burst of wet and dry materials such
as paper.
Absorption tester
Measures the absorption rate of absorbent materials in real-time.
DAT - Dynamic absorption tester
Automated testing instrument for understanding the dynamic wetting
of a substrate by a liquid droplet.
Cobb tester
Measures the water absorptiveness of paper and cardboard.
Gurley smoothness tester & densometer
Measures the air permeability and smoothness of sheet materials.
Bekk smoothness tester
Measures the smoothness of paper surfaces in accordance to Bekk
method.
Air permeability tester
Measures the air-permeability of sheet materials.
Formation tester
Provides the standard formation index.
Spec*Scan
Scanner-based image analyser for quantifying dirt specks, shives
and stickies.
Sutherland rub tester
Tests the abrasion resistance of different materials.
Taber® abrasion tester
For testing the abrasiveness of paper and similar materials.
