| 1.
Servo Hydraulic Actuators:
Used for measuring Static Force and Dynamic Force.
Applications : Structural Lab, Civil Engineering,
Metallurgy & Automotive Industries
2. Creep Testing Machine:
Used for measuring Length Change in the Fixed time Fixed
Force.
Applications : Metallurgy , Polymers &
Plastics
3. Dilatometer:
Used for measuring length change proportional with Temperature
Change.
Application : Ceramic & Metallurgy
4. Drop Weight Resting:
Used for measuring of sample strength opposite the impact.
Applications : Metallurgy, Polymer, Plastic
5. Fatigue Testing Machine:
Used for measuring Fatigue opposite the pull-push and rotary
bending force. Applications: Metallurgy
& Automotive Industries
6. Universal Tensile Testing Machine:
Used for measuring Tensile Resistance , Compression resistance
and Bending Resistance force.
Applications: Metallurgy, Polymers, Plastics,
Rubber
7. Pendulum Impact Testing Machine:
Used for measuring Sample Strength opposite the impact.
Applications: Metallurgy, Polymers, Plastics
& Rubber
8. Rotary Bending Testing Machine:
Used for measuring of Fatigue resistance with method Rotary
bending .
Applications: Metallurgy
9. Sheet Metal Testing:
Used for testing of convertibility of sheet metal in accordance
with all known standards and procedures. Testing the influences
of surface treatments, coatings, lubricants, with typical
types of transformation such as deep drawing, stretch forming
and forming without press down device. Testing the effect
of tools and process parameters on the transformation process
and also detects sensitive crack even for very thin sheets.
Application: Metallurgy.
10. Hardness Testing:
Used for measuring of Hardness in Metals, Polymers &
Rubber.
Applications: Metallurgy, Polymers, Plastic
& Rubber
11. Rolling Mills:
For Flattening of Metal Sheets with different thickness
range.
Application: Metallurgy
12. Micro Hardness Testing:
Used for measuring of hardness with low force.
Application: Metallurgy
13. Grinder & Polisher:
Used for grinding, polishing and shining of the metals.
Applications: Metallurgy
14. Mount Equipment:
Used for preparing of Samples for Grinder & Polisher.
15. Cutter:
Used for Cutting of Samples.
Applications: Metallurgy Polymer, Plastics,
Rubbers
16. Quanta Meter:
Used for Analyzing of different Elements in Metals.
Application: Metallurgy & Mining Industries
17. Furnace:
For heating & melting of Metals.
Application: Metallurgy
18. Thermal Analyzers:
For studying the Thermal Behavior of Materials which can
be evaluated under different temperatures.
Applications: Ceramics, Metals , Plastics
& Polymers
19. Physical Sample Preparation
Equipment:
A test specimen is the most important component of tensile
testing for it determines the actual physical properties
of materials being tested.
|
Cutting
